LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 192 (Ignition (H6DO)) >> Spark Plug >> Installation >> RH Side

RH Side

WARNING: This page is about a different car, the 2004 Subaru Outback. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal.

Tightening torque (Spark plug): 

  1. 21 N-m (2.1 kgf-m, 15 ft-lb) 
CAUTION: The above torque should be only applied to new spark plugs without oil on their threads. In case their threads are lubricated, the torque should be reduced by approximately 1/3 of the specified torque in order to avoid over-stressing. 

Tightening torque (Ignition coil): 

  1. 16 N-m (1.6 kgf-m, 12 ft-lb)