LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Engine (Diagnostics) (H4SO)) >> Subaru Select Monitor >> Operation >> Read Current Data For Engine (OBD Mode)

Read Current Data For Engine (OBD Mode)

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the << Engine Diagnosis >> display screen, select the {Current Data Display & Save} and press the [YES] key.
  5. On the << Data Display Menu >> display screen, select the {Data Display} and press the [YES] key.
  6. Using the scroll key, move the display screen up or down until the desired data is shown.
    • A list of the support data is shown in the following table.
    Fig 1: Support Data Listing Table - (OBD MODE)
    G00897840Courtesy of SUBARU OF AMERICA, INC.
    NOTE: For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
scientia non olet · About LEMON Manuals