Read Current Data For Engine (Normal Mode)

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.

On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
Press the [YES] key after displayed the information of engine type.
On the << Engine Diagnosis >> display screen, select the {Current Data Display & Save} and press the [YES] key.
On the << Data Display Menu >> display screen, select the {Data Display} and press the [YES] key.
Using the scroll key, move the display screen up or down until the desired data is shown.
- A list of the support data is shown in the following table.
Fig 1: Support Data Listing Table (1 Of 2)
Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Support Data Listing Table (2 Of 2)
Courtesy of SUBARU OF AMERICA, INC.
NOTE:
- For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
- For select monitor display details, refer to the following.