LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Engine (Diagnostics) (H4SO)) >> Read Diagnostic Trouble Code >> Operation >> SUBARU Select Monitor (Normal Mode)

SUBARU Select Monitor (Normal Mode)

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. On the << Main Menu >> display screen, select the {Each System Check} and press the [YES] key.
  2. On the << System Selection Menu >> display screen, select the {Engine Control System} and press the [YES] key.
  3. Press the [YES] key after displayed the information of engine type.
  4. On the << Engine Diagnosis >> display screen, select the {Diagnostic Code(s) Display} and press the [YES] key.
  5. On the << Diagnostic Code(s) Display >> display screen, select the {Current Diagnostic Code(s)} or {History Diagnostic Code(s)} and press the [YES] key.
    NOTE:
    • For detailed operation procedure, refer to the Subaru Select Monitor Operation Manual.
    • For detailed concerning diagnostic trouble codes, refer to the List of Diagnostic Trouble Code DTC).

    Refer to LIST OF DIAGNOSTIC TROUBLE CODE (DTC) .

scientia non olet · About LEMON Manuals