LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 169 (Engine (Diagnostics) (H4SO)) >> Data Link Connector >> Note

Data Link Connector: Note

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. This connector is used both for OBD-II general scan tools and the Subaru Select Monitor.
  2. Terminal No. 4 to No. 6 of the data link connector is used for the Subaru Select Monitor signal.
    CAUTION: Do not connect any scan tools other than the OBD-II general scan tools and the Subaru Select Monitor, because the circuit for the Subaru Select Monitor may be damaged. 
    Fig 1: Identifying Data Link Connector
    G00897829Courtesy of SUBARU OF AMERICA, INC.
    Fig 2: Identifying Terminal Number & Contents Table
    G00897830Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals