LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Mechanical (H4SO)) >> Valve Rocker Assembly >> Removal

Valve Rocker Assembly: Removal

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove V-belt. Refer to REMOVAL , V-BELT.
  2. Remove crankshaft pulley. Refer to REMOVAL , CRANKSHAFT PULLEY.
  3. Remove belt cover. Refer to REMOVAL , BELT COVER.
  4. Remove timing belt assembly. Refer to REMOVAL , TIMING BELT ASSEMBLY.
  5. Remove camshaft sprocket. Refer to REMOVAL , CAMSHAFT SPROCKET.
  6. Disconnect PCV hose and remove rocker cover.
  7. Removal of valve rocker assembly
    1. Remove bolts (a) through (h) in alphabetical sequence.
      NOTE: Leave two or three threads of bolts (g and h) engaged to retain valve rocker assembly.
      Fig 1: Removing Bolts In Alphabetical Sequence
      G00900856Courtesy of SUBARU OF AMERICA, INC.
    2. Remove valve rocker assembly.
      Fig 2: Removing Valve Rocker Assembly
      G00900857Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals