LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 164 (Engine Mechanical (H4SO)) >> Cylinder Block >> Inspection >> Cylinder Block

Cylinder Block

WARNING: This page is about a different car, the 2004 Subaru Outback, 2004 Subaru Legacy, and 2004 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Visually check for cracks and damage. Especially, inspect important parts by means of red lead check.
  2. Check the oil passages for clogging.
  3. Inspect crankcase surface that mates with cylinder head for warping by using a straight edge, and correct by grinding if necessary.
    1. Warping limit:  0.05 mm (0.0020 in)
    2. Grinding limit:  0.1 mm (0.004 in)
    3. Standard height of cylinder block:  201.0 mm (7.91 in)
scientia non olet · About LEMON Manuals