LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 149 (Automatic Trans) >> Rear Drive Shaft >> Installation

Rear Drive Shaft: Installation

WARNING: This page is about a different car, the 2003 Subaru Outback, 2003 Subaru Legacy, and 2003 Subaru Baja. However, it is still accessible from the selected car via links, so may be relevant.
  1. Select the appropriate shim. < Ref. to VTD MODEL , ADJUSTMENT, Transfer Clutch.>
  2. Install drive plate and driven plate.
  3. Insert rear driveshaft into the center differential assembly.
  4. Join transmission case and extension case. Install rear wheel speed sensor. < Ref. to INSTALLATION , Extension Case.>
  5. Install transmission assembly. < Ref. to INSTALLATION , Automatic Transmission Assembly.>
scientia non olet · About LEMON Manuals