LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Automatic Transmission (On-Vehicle Service)) >> Inhibitor Switch >> Adjustment

Inhibitor Switch: Adjustment

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Loosen the three inhibitor switch securing bolts.
  2. Shift the select lever to the N range.
  3. Insert ST as vertical as possible into the holes in the inhibitor switch lever and switch body.
    Fig 1: Inserting ST Vertically
    G02960437Courtesy of SUBARU OF AMERICA, INC.
  4. Tighten the three inhibitor switch bolts.
    1. Tightening torque:  3.4 N.m (0.35 kgf-m, 2.5 ft-lb)
  5. Repeat the above checks. If the inhibitor switch is determined to be "faulty", replace it.
scientia non olet · About LEMON Manuals