LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Automatic Transmission (On-Vehicle Service)) >> Dropping Resistor >> Removal

Dropping Resistor: Removal

WARNING: This page is about a different car, the 2002 Subaru Outback and 2002 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
NOTE: Model without VDC system only
  1. Disconnect battery ground cable.
    Fig 1: Disconnecting Battery Ground Cable
    G02960499Courtesy of SUBARU OF AMERICA, INC.
  2. Remove air intake duct.
  3. Disconnect connector from dropping resistor.
  4. Remove dropping resistor.
    Fig 2: Removing Dropping Resistor
    G02960500Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals