LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (HVAC) >> Heater Unit >> Removal

Heater Unit: Removal

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect GND cable from battery.
  2. Remove heater hoses (inlet, outlet) in engine compartment.
    NOTE: Drain as much coolant from heater unit as possible, and plug disconnected hose with cloth. See DRAIN & FILL COOLING SYSTEM .
  3. Remove instrument panel. See REMOVAL , Instrument Panel Assembly.
  4. Remove steering support beam.
  5. Remove cooling unit. See REMOVAL  , Intake Unit with Evaporator.
  6. Remove heater unit.
    Fig 1: Removing Heater Unit
    G02133827
scientia non olet · About LEMON Manuals