LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2001 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 101 (HVAC) >> Blower Motor Assembly >> Removal

Blower Motor Assembly: Removal

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect GND cable from battery.
  2. Remove glove box.
    Fig 1: Removing Glove Box
    G02133828
  3. Disconnect blower motor harness connector.
  4. Disconnect aspirator pipe (A).
  5. Remove blower motor mounting screw.
    Fig 2: Removing Blower Motor Mounting Screw
    G02133829
  6. Remove blower motor assembly.
scientia non olet · About LEMON Manuals