Control Valve Body: Removal

Clean transmission exterior.
Drain ATF completely.
NOTE: Tighten ATF drain plug after draining ATF.
1. Tightening torque: 25 N.m (2.5 kgf-m, 18.1 ft-lb)
Fig 1: Identifying ATF Drain Plug
Remove the oil pan.
NOTE:
- Remove and clean the magnet.
- Remove the old gasket on the oil pan and transmission case completely.
Disconnect duty solenoids and ATF temperature sensor connectors. Remove connectors from clip and disconnect connectors at 9 places.

Fig 2: Identifying Duty Solenoids & ATF Temperature Sensor Connectors
Remove the control valve.
CAUTION: When removing control valve body, be careful not to interfere with transfer duty solenoid wiring.

Fig 3: Removing Control Valve