LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 39 (Overhaul & Servicing) >> Speedometer Gear >> Installation

Speedometer Gear: Installation

WARNING: This page is about a different car, the 2001 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install washer and speedometer shaft, and press fit oil seal with ST.
    CAUTION: Use new oil seal, if it has been removed.

    ST 899824100 or 49982700 PRESS

  2. Install vehicle speed sensor. See INSTALLATION - VEHICLE SPEED SENSOR  .
  3. Install speedometer driven gear and snap ring.
    CAUTION: Use new snap ring, if it has been removed.
    Fig 1: Installing Speedometer Driven Gear And Snap Ring
    G02060311
  4. Install transmission case. See INSTALLATION - TRANSMISSION CASE  .
  5. Install transfer case and extension case assembly. See INSTALLATION - TRANSFER CASE AND EXTENSION CASE ASSEMBLY  .
  6. Install back-up light switch and neutral position switch.
  7. Install the manual transmission assembly to vehicle. See INSTALLATION - TRANSMISSION TO ENGINE  .
scientia non olet · About LEMON Manuals