LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Standard >> Repair and Diagnosis (Single Page) >> Restraints >> Air Bag, SRS >> Air Bag Restraint Systems >> Diagnostic Tests >> Air Bag Warning Light Displays Fault Code, Then Normal Code (Flashing Fault Code) >> Air Bag System Component Visual Inspection

Air Bag System Component Visual Inspection

  1. Visually inspect components according to fault code displayed. See RETRIEVING CODES  under DIAGNOSTICS. Inspect components related to fault code displayed, including connectors, wiring harnesses, cases, and mounts for defects. See FAULT CODE COMPONENTS  . Replace defective components as necessary and go to next step. If no problems are detected, go to AIR BAG SYSTEM COMPONENT VIBRATION INSPECTION  .
  2. Turn ignition off and disconnect negative battery terminal. Reconnect system components and activate air bag system. See DISABLING & ACTIVATING AIR BAG SYSTEM  . Clear air bag system codes. See CLEARING CODES  under DIAGNOSTICS. Check for normal air bag system operation. See SYSTEM OPERATION CHECK  .
scientia non olet · About LEMON Manuals