LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 20 (Lighting Systems) >> Rear Finisher Light Assembly >> Removal >> Sedan

Rear Finisher Light Assembly: Removal: Sedan

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open the trunk lid.
  2. Remove cover (A).
  3. Disconnect connector (B) from rear finisher light.
  4. Remove ten nuts and then detach rear finisher light from trunk lid.
    Fig 1: Detaching Rear Finisher Light (Sedan)
    G02098030