Transfer Clutch: Installation

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.

Install the transfer clutch assembly to the case.
CAUTION: Be careful not to damage the seal rings.

Fig 1: Installing Transfer Clutch Assembly
Tighten bolts to secure the case.
Tightening torque:
1. 25 N.m (2.5 kgf-m, 18.1 ft-lb)
  
  Fig 2: Tightening Extension Case Bolts