Oil Pump: Assembly
WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
- Install oil pump rotor assembly to oil pump housing.
- Install the oil pump cover.
Tightening torque:
- 25 N.m (2.5 kgf-m, 18.1 ft-lb)
NOTE:- Align both pivots with the pivot holes of the cover, and install the cover being careful not to apply undue force to the pivots.
- After assembling, turn the oil pump shaft to check for smooth rotation of the rotor.
- Install the oil seal retainer and seal rings. After adjusting the drive pinion backlash and tooth contact.