LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Overhaul Automatic Transmission) >> Inhibitor Switch >> Removal

Inhibitor Switch: Removal

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Move select lever to neutral position.
  2. Remove air intake chamber and duct.
  3. Disconnect inhibitor switch connector.
    Fig 1: Disconnecting Inhibitor Switch Connector
    G02037022
  4. Remove Exhaust Pipe 
    • Forester and Impreza:  Remove front exhaust pipe.
    • Legacy and Outback:  Remove center exhaust pipe.
  5. Remove snap pin from range select lever.
    Fig 2: Removing Snap Pin From Range Select Lever
    G02037023
  6. Remove plate assembly from transmission case.
    Fig 3: Removing Plate Assembly From Transmission Case
    G02037024
  7. Remove bolts.
    Fig 4: Removing Bolts
    G02037025
  8. Move range select lever to parking position (left side).
    Fig 5: Moving Range Select Lever To Parking Position (Left Side)
    G02037026
  9. Removing inhibitor switch from transmission.
    Fig 6: Removing Inhibitor Switch From Transmission
    G02037027
scientia non olet · About LEMON Manuals