LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Overhaul Automatic Transmission) >> Extension Case >> Disassembly >> With VTD

With VTD

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using ST1, ST2, ST3 and a press, remove snap ring.

    ST1 398673600 COMPRESSOR

    ST2 498627100 SEAT

    ST3 398663600 PLIERS

    Fig 1: Removing Snap Ring
    G02053094
  2. Remove test plug.
    Fig 2: Removing Test Plug
    G02053095
  3. Remove clutch piston by compressed air.
    Fig 3: Removing Clutch Piston
    G02053096
  4. Remove transfer clutch pipe.
    CAUTION: Be careful not to bend the pipe.
    Fig 4: Removing Transfer Clutch Pipe
    G02053097
  5. Remove the dust cover from the extension case.
  6. Remove the oil seal from the extension case.
scientia non olet · About LEMON Manuals