LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 2000 >> Outback Base, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 18 (Overhaul Automatic Transmission) >> Extension Case >> Assembly >> With VTD

With VTD

WARNING: This page is about a different car, the 2001 Subaru Outback, 2001 Subaru Legacy, 2001 Subaru Impreza, and 2001 Subaru Forester. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using the ST and a press, press in a new oil seal.

    ST 498057300 INSTALLER

  2. Press in the dust cover.
  3. Install transfer clutch pipe.
    CAUTION: Be careful not to bend the pipe.
    Fig 1: Installing Transfer Clutch Pipe
    G02053100
  4. Install test plug.

    Tightening torque: 

    1. 13 N.m (1.3 kgf-m, 9.4 ft-lb)
      Fig 2: Installing Test Plug
      G02053101
  5. Insert the multi-plate clutch, the drive plate, the driven plate, and the spring retainer.
    Fig 3: Installing Clutch Pack Components
    G02053102
  6. Using the ST1, ST2, and ST3, install the snap ring.

    ST1 398673600 COMPRESSOR

    ST2 498627100 SEAT

    ST3 398663600 PLIERS

    Fig 4: Installing Snap Ring
    G02053103
scientia non olet · About LEMON Manuals