3.0 L Model

WARNING: This page is about a different car, the 2001 Subaru Outback and 2001 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.

Install the oil cooler outlet and inlet pipes.
CAUTION: Be sure to use a new aluminum washer.

Tightening torque:
1. T1: 44 N.m (4.5 kgf-m, 32.5 ft-lb)
2. T2: 25 N.m (2.5 kgf-m, 18.1 ft-lb)
  
  Fig 1: Installing Oil Cooler Outlet & Inlet Pipes
Install ATF cooler pipe to frame.

Fig 2: Installing ATF Cooler Pipe To Frame
Connect ATF cooler hose to transmission.
NOTE:
- Install so that the hose is not folded over, excessively bent, or twisted.
- Be careful to insert the hose to the specified position.
Fig 3: Connecting ATF Cooler Hose To Transmission
Connect ATF cooler hoses from ATF filter.
NOTE:
- Install so that the hose is not folded over, excessively bent, or twisted.
- Be careful to insert the hose to the specified position.
Fig 4: Connecting ATF Cooler Hoses From ATF Filter
Connect ATF cooler hoses from radiator.
NOTE:
- Install so that the hose is not folded over, excessively bent, or twisted.
- Be careful to insert the hose to the specified position.
Fig 5: Connecting ATF Cooler Hoses From Radiator
Install front left mud guard. See MUD GUARD .
Install the under cover.
Install battery and washer tank.
Fill ATF. See Automatic Transmission Fluid .