Brake/Stoplight Switch Test
Disconnect brake/stoplight switch harness connector. Check resistance between terminal with brake pedal in appropriate position. See TESTING BRAKE/STOPLIGHT SWITCH table. See Fig 1 . If continuity is not as specified, replace brake/stoplight switch.
TESTING BRAKE/STOPLIGHT SWITCH (1)
| Pedal Position | Brake Switch Continuity Between Terminals No. 2 & 3 | Stoplight Switch Continuity Between Terminals No. 1 & 2 | ||
|---|---|---|---|---|
| Down | No Continuity | Continuity | ||
| Up | Continuity | No Continuity | ||
|
||||