Power Mirror Switch Test: Impreza
Remove power mirror switch from center console. See POWER MIRROR SWITCH under REMOVAL & INSTALLATION. Disconnect the mirror switch connector. Check continuity between specified terminals of the switch connector with the switch button in specified position(s). See Fig 1. See POWER MIRROR SWITCH CONTINUITY TEST table. Replace switch if continuity is not as specified.
POWER MIRROR SWITCH CONTINUITY TEST
| Switch Position | Wire Color | Terminal No. | |
|---|---|---|---|
| Left Mirror | |||
| Up | GRN/BLK & BLU/BLK | 4 & 7 | |
| BLK & RED | 2 & 1 | ||
| Down | RED & BLU/BLK | 2 & 7 | |
| GRN/BLK & RED | 4 & 1 | ||
| Left | GRN/BLK & BLK/RED | 4 & 9 | |
| BLK & RED | 2 & 1 | ||
| Right | RED & BLK/RED | 2 & 9 | |
| GRN/BLK & RED | 4 & 1 | ||
| Right Mirror | |||
| Up | GRN/BLK & BRN | 4 & 6 | |
| BLK & RED | 2 & 1 | ||
| Down | BLK & BRN | 2 & 6 | |
| GRN/BLK & RED | 4 & 1 | ||
| Left | GRN/BLK & RED/BLU | 4 & 8 | |
| BLK & RED | 2 & 1 | ||
| Right | BLK & RED/BLU | 2 & 8 | |
| GRN/BLK & RED | 4 & 1 | ||