Component Testing: Sub-Switch
Disconnect sub-switch harness connector. Measure resistance between specified terminals with switch in appropriate position. SeeFig 1 . See SUB-SWITCH RESISTANCE . If resistance is not as specified replace sub-switch.
SUB-SWITCH RESISTANCE
| Switch Position | Between Terminals No. | Ohms |
|---|---|---|
| SET/COAST | 1 & 2 | 0 |
| RESUME/ACCEL | 1 & 3 | 0 |
| CANCEL | 1 & 2, 1 & 3 | Approx. 20 |