Component Testing: Sub-Switch
NOTE:
Identify terminal No. by wire color. See WIRING DIAGRAMS
.
Disconnect sub-switch harness connector. Measure resistance between specified terminals with in appropriate position. See SUB-SWITCH RESISTANCE . If resistance is not as specified replace sub-switch.
SUB-SWITCH RESISTANCE
| Switch Position | Between Terminals No. | Ohms |
|---|---|---|
| SET/COAST | 1 & 2 | 0 |
| RESUME/ACCEL | 1 & 3 | 0 |
| CANCEL | 1 & 2, 1 & 3 | Approx. 20 |