LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1997 >> Legacy Outback, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Component Testing >> Door Lock/Unlock Switch >> Driver's Door

Driver's Door

  1. Disconnect driver's power door lock actuator 2-pin harness connector. Lock door and check continuity between driver's power door lock actuator 2-pin connector. If continuity does not exist, go to next step. If continuity exists, replace driver's door lock actuator.
  2. Unlock door and check continuity between terminals. If continuity does not exist, replace driver's door lock actuator. If continuity exists, driver's door actuator is okay at this time.
scientia non olet · About LEMON Manuals