LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1997 >> Legacy Outback Limited, Automatic >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Anti-Theft System >> Component Testing >> Horn Relay

Horn Relay

  1. Remove horn relay. Ensure continuity does not exist between terminals No. 2 and 3. SeeFig 1 . Ensure continuity exists between terminals No. 1 and 2. If continuity is as specified, go to next step. If continuity is not as specified, replace horn relay.
  2. Apply battery voltage across terminals No. 1 and 2. Ensure continuity exists between terminals No. 1 and 3. If continuity does not exist, replace horn relay. If continuity exists, relay is okay at this time.
Fig 1: Identifying Horn Relay Terminals
G97I11088Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals