Torque Specifications
WARNING: This page is about a different car, the 1995 Subaru Impreza. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Axle Shaft Nut | 123-152 (167-206) | ||
| Backing Plate Mounting Bolts | 34-43 (46-58) | ||
| Booster Mounting Nuts | 9-17 (12-23) | ||
| Brakeline-To-Caliper | |||
| Front | 12-14 (16-19) | ||
| Rear | 10-13 (14-18) | ||
| Brakeline-To-Master Cylinder | 10-13 (14-18) | ||
| Caliper Guide Pin | |||
| Front | |||
| Dual Piston Caliper | 25-32 (34-44) | ||
| Single Piston Caliper | 33-40 (45-54) | ||
| Rear | 16-23 (22-31) | ||
| Caliper Pin Bolt | 23-30 (31-41) | ||
| Caliper Support Bracket Mounting Bolts | |||
| Front | |||
| Dual Piston Caliper | 50-65 (68-88) | ||
| Single Piston Caliper | 36-51 (49-69) | ||
| Rear | 34-43 (46-58) | ||
| Hydraulic Control Unit Retaining Bolt | 11-17 (13-23) | ||
| Hydraulic Lines-To-Control Unit | 10-13 (14-18) | ||
| Lateral Link Self-Locking Nut (Rear) | 87-116 (118-157) | ||
| Master Cylinder Mounting Nut | 7-13 (10-18) | ||
| Proportioning Valve Bracket Bolts | 10-17 (14-23) | ||
| Stabilizer Link-To-Front Transverse Link | 14-22 (19-30) | ||
| Stabilizer-To-Crossmember | 15-21 (21-28) | ||
| Strut Lower Retaining Bolts | |||
| Standard Suspension | 98-119 (133-162) | ||
| Tie Rod Ball Joint Nut | 18-22 (24-30) | ||
| Tone Wheel | 7-12 (10-16) | ||
| Trailing Link Self-Locking Nut | 72-94 (98-128) | ||
| Transverse Link Ball Joint Nut | 28-37 (38-50) | ||
| Wheel Lug Nut | 58-72 (79-98) | ||
| Wheel Speed Sensor Harness Bracket Bolt | |||
| Front | 7-12 (10-16) | ||
| Rear | 17-31 (23-42) | ||
| Wheel Speed Sensor Retaining Bolt | 17-31 (23-42) | ||
| INCH Lbs. (N.m) | |||
| Bleed Screw | 62-80 (7.0-9.0) | ||
| Hydraulic Control Unit ABS Cover | 11-13 (1.2-1.5) | ||