Power Mirror Motor
Remove door panel. Disconnect mirror motor harness connector. Using 12-volt power supply and 2 jumper wires, apply voltage and ground to specified terminal. See POWER MIRROR MOTOR TEST (BOTH MIRRORS) . SeeFig 1 .
POWER MIRROR MOTOR TEST (BOTH MIRRORS)
| Movement | Pin No. (+) (Wire Color) | Pin No. (-) (Wire Color) |
|---|---|---|
| Up | 1 (Blue) | 3 (Yellow) |
| Down | 3 (Yellow) | 1 (Blue) |
| Left | 1 (Blue) | 2 (White) |
| Right | 2 (White) | 1 (Blue) |