Control Valve Body: Reassembly

Reverse disassembly sequence. Ensure proper positioning of steel balls, orifice and filter. See Fig 1 . Tighten bolts and upper-lower valve body bolts to specification. See TORQUE SPECIFICATIONS table. See BOLT LOCATION & LENGTH table for correct installation location. See Fig 2 .
Install shift solenoids and duty solenoid "A". Bolt length for shift solenoids is .63" (16 mm). Bolt length for duty solenoid "A" is 1.06" (27 mm).

BOLT LOCATION & LENGTH

Location ⁽¹⁾

Length In. (mm)

2.76 (70)

1.97 (50)

1.30 (33)

1.06 (27)

1.10 (28)

⁽¹⁾	For bolt location, See Fig 2 .

Fig 1: Identifying Valve Body Steel Ball & Filter Locations

Courtesy of SUBARU OF AMERICA, INC.

Fig 2: Valve Body Bolt Location

Courtesy of SUBARU OF AMERICA, INC.

Fig 3: Exploded View Of Valve Body Assembly

Courtesy of SUBARU OF AMERICA, INC.