Component Testing: Notes
- Ensure brakelights remain on when brake pedal is released. If lights remain on, check and repair brakelight system as required. If lights go out when brake pedal is released, disconnect connector from shift lock control unit. Control unit is located behind right side of steering column lower panel. See Figure .
- If shift lock occurs when shift selector lever is moved to "P" position, replace shift lock control unit. If shift lock does not occur, disconnect connector from shift lock solenoid. Ensure shift lock function occurs when shift selector lever is moved to "P" position. If shift lock still occurs, there is a short in shift lock solenoid's RG harness. If shift lock does not occur, check shift selector lever assembly.
CAUTION:
When conducting operational checks of key lock solenoid, do not apply 12 volts to solenoid for more than 1 second, solenoid circuit damage may occur.