LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1992 >> Justy Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 2 (Steering Columns) >> Overhaul >> Steering Column >> Reassembly

Steering Column: Reassembly

WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 1991 Subaru XT6, 1991 Subaru XT, 1991 Subaru Loyale, 1991 Subaru Legacy, and 1991 Subaru Justy. However, it is still accessible from the selected car via links, so may be relevant.
  1. To reassemble, reverse disassembly procedure. Lubricate shaft sliding section at lower and upper bearing and horn brush.
  2. With steering wheel in place, check clearance between steering wheel and cover. If clearance exceeds .04-.12" (1.0-3.0 mm), loosen column cover screws to adjust.
scientia non olet · About LEMON Manuals