Fluid Capacity Specifications
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 1989 Subaru XT6, 1989 Subaru XT, 1989 Subaru RX, 1989 Subaru Justy, and 1989 Subaru GL-10. However, it is still accessible from the selected car via links, so may be relevant.
TRANSMISSION REFILL CAPACITIES
| Application | Qts. (L) | |
|---|---|---|
| Except Justy | ||
| Full-Time 4WD | 3.7 (3.5) | |
| FWD | 2.7 (2.6) | |
| Selective 4WD | 3.5 (3.3 | |
| Justy | ||
| 2WD | 2.4 (2.3) | |
| 4WD | 3.5 (3.3) | |
NOTE:
On 4WD Justy, the selection of FWD or 4WD is accomplished by engine vacuum acting on a dual positioning vacuum diaphragm. There are 2 solenoid switches that direct vacuum to each side of diaphragm. There are no external adjustments applicable to this transaxle.