Control Unit: Installation
WARNING: This page is about a different car, the 1992 Subaru SVX and 1992 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
To install control unit, reverse removal procedure. Use new control unit mounting bolts. Ensure all SRS connectors are fully connected. After installation procedure is complete, reactivate SRS. Check AIR BAG warning light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .
To install control unit, reverse removal procedure. Use new control unit mounting bolts. Ensure all SRS connectors are fully connected. After installation procedure is complete, reactivate SRS. Check AIR BAG warning light to ensure system is functioning properly. See TESTING - SYSTEM OPERATION CHECK .