LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1990 >> XT 1.8 5 >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Removal & Installation >> Fuel Pump >> Inspection

Fuel Pump: Inspection

Connect leads to harness connector, and apply a 12-volt power supply to check whether pump operates.

CAUTION: Keep battery apart from pump as far as possible. Be sure to turn the 12V supply ON and OFF on battery side. DO NOT  run pump for a long time under non-loaded condition.
scientia non olet · About LEMON Manuals