LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1989 >> RX Standard >> Repair and Diagnosis >> Electrical >> Starter >> Testing >> Performance Tests >> Load Test (XT & XT6)

Load Test (XT & XT6)

  1. Install starter on bench tester. On A/T models apply 10 ft. lbs. (13 N.m) torque to starter. With voltage adjusted to 8 volts, starter should rotate at 880 RPM with current draw of less than 370 amps.
  2. On M/T models, apply 6.3 ft. lbs. (8.2 N.m) torque to starter. With voltage adjusted to 8 volts, starter should rotate at 980 RPM with current draw of less than 280 amps.
scientia non olet · About LEMON Manuals