LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1989 >> RX Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 8 (Servicing - A/T) >> Lubrication >> Checking Fluid Level >> Transaxle

Checking Fluid Level: Transaxle

WARNING: This page is about a different car, the 1994 Subaru Legacy, 1993 Subaru Legacy, 1992 Subaru Legacy, 1991 Subaru Legacy, and 1990 Subaru Legacy. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm engine to normal operating temperature. Park vehicle on level floor. Engage transaxle in all gear positions.
  2. Set transmission selector lever in Park with engine idling. Remove dipstick and clean with lint-free cloth. Check fluid level. Fluid level should be between upper and lower marks on dipstick. Add fluid if necessary. DO NOT  overfill.
scientia non olet · About LEMON Manuals