Removal & Installation: Clutch: Installation

Install clutch release lever and release bearing holder. Lubricate inner groove of release bearing holder, transaxle mainshaft spline and contact surfaces of release lever with a light coat of molybdenum disulphide grease.
On all except Justy, remount engine and transaxle on body. Ensure new spring pins are installed in axle shafts. On Justy, ensure new spring pins are installed in axle shafts.
On all models, use clutch alignment tool to position clutch disc against flywheel. Position clutch cover against disc. Tighten cover bolts in a crisscross manner. To complete installation, reverse removal procedure.