General Information
The self-diagnosis system detects and indicates faults in various inputs and outputs of electronic control. The warning light (ECS light) on the instrument panel, indicates that a fault has occurred in the system. The Light Emitting Diode (LED) in the control unit indicates a trouble code has been set. See Fig 1 . If such a failure of sensors should occur, the fail-safe function is provided to ensure minimal driveability.
RELATION BETWEEN MODES & CONNECTORS
| Mode Type (1) | Read Memory Connector | Test Mode Connector | ||
|---|---|---|---|---|
| U-Check | Disconnect | Disconnect | ||
| Read Memory | Connect | Disconnect | ||
| D-Check | Disconnect | Connect | ||
| Clear Memory | Connect | Connect | ||
|
||||