LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> GL 2D Hardtop, Automatic >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - NIPPONDENSO Electronic >> Overhaul >> Disassembly

Ignition System - NIPPONDENSO Electronic: Overhaul: Disassembly

  1. Remove distributor cap rotor, dust cover, and packing. Remove pick-up coil assembly, igniter and/or coil (if equipped), vacuum advance mechanism, breaker plate and drive pinion.
  2. Remove 2 screws from bottom of distributor housing. Using a plastic hammer, carefully drive out shaft. Remove thick washer, bearing, thin washer, spring, and blue washer from shaft.
  3. Note location of thin and thick governor springs, and remove springs (if equipped). Remove cam cap, signal rotor (reluctor), weight snap ring and weights.
scientia non olet · About LEMON Manuals