LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1983 >> DL 2D Hatchback >> Repair and Diagnosis >> Engine Performance >> Ignition System >> Ignition System - HITACHI >> Adjustments >> Air Gap

Air Gap

  1. Align tooth of reluctor with upright teeth of stator. Measure gap with a feeler gauge. Air gap should be .012-.020" (.3-.5 mm).
  2. If adjustment is necessary, loosen stator mounting screws. Insert a .016" (.4 mm) feeler gauge between reluctor and stator teeth. Move stator against gauge and tighten mounting screws. Recheck air gap at each reluctor tooth. See Fig 1.
Fig 1: Adjusting Reluctor-to-Stator Air Gap Gap should be .012-.020" (.3-.5 mm).
G28994
scientia non olet · About LEMON Manuals