LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1982 >> GLF Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starters - NIPPONDENSO Reduction Gear >> Testing >> Performance Tests >> No Load Test (All Models)

No Load Test (All Models)

  1. Connect ammeter in series with starter motor and 12-volt battery as shown in Figure. Connect voltmeter in parallel with battery and observe readings.
  2. Starter should spin smoothly at 3000 RPM or more with current draw below 90 amps. (180 amps, on diesel engines) at 11.5 volts.
scientia non olet · About LEMON Manuals