LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1982 >> GLF Automatic Trans >> Repair and Diagnosis >> Electrical >> Starter >> Starters - NIPPONDENSO Reduction Gear >> Testing >> Performance Tests >> Lock Test (Subaru)

Lock Test (Subaru)

  1. On manual transmission models, adjust voltage to 2.5 volts. With starter stalled or not rotating, torque should measure 5 ft. lbs. (6.5 N.m) with current draw below 300 amps.
    Fig 1: Ammeter and Voltmeter Hook-Up for No Load Test
    G09330265Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

    Subaru starter is illustrated. 

  2. On automatic transmission models, adjust voltage to 2.4 volts. With starter stalled or not rotating, torque should measure 8 ft. lbs. (10.6 N.m) with current draw below 400 amps.
scientia non olet · About LEMON Manuals