LEMON Manuals: Even more car manuals for everyone
Home >> Subaru >> 1981 >> Brat GL >> Repair and Diagnosis (Single Page) >> Engine Mechanical >> Auxiliary Emission Control Systems >> Auxiliary Emission Control Systems >> Testing >> Shift-Up Control System >> Timer

Shift-Up Control System: Timer

Make a test circuit as shown in Fig 1. When voltage is applied at terminals 1 and 2, current should be present across test resistor. After 65 seconds, current flow should stop.

CAUTION: When voltage is applied to terminals 1 and 2, do not connect terminals 2 and 4 directly.
Fig 1: Subaru Shift-Up Control Timer Testing
G09314028Courtesy of SUBARU OF AMERICA, INC.
scientia non olet · About LEMON Manuals