LEMON Manuals: Even more car manuals for everyone
Home >> Sterling >> 1988 >> 825 S, 2.5 C >> Repair and Diagnosis >> Engine Performance >> System >> Fuel Injection System - PGM-FI System >> Testing >> Injector

Fuel Injection System - PGM-FI System: Testing: Injector

NOTE: Check idle speed, ignition timing, valve clearance and idle CO % before performing test.
  1. Check for a clicking sound at each injector using a stethoscope during engine idle. If any injector fails to emit typical clicking sound, check wiring between ECU and injector. Also, check injector resistance. Injectors should measure 1.5-2.5 ohms on all models except Civic with Throttle Body Injection (TBI).
  2. Replace any injector that does not fall within resistance specification.
scientia non olet · About LEMON Manuals