Remove/install bushing of transmission mounting - AR26.10-P-0030MEX
MODEL 451.390/490
| Risk of death when touching components on vehicles with high-voltage on-board electrical system | Do not touch components and open lines of the high-voltage on-board electrical system. Persons who wear electronic implants (e.g. cardiac pacemakers), must not carry out any work on high-voltage on-board electrical systems. | AS54.00-Z-0001-01A | |
| Note on high-voltage on-board electrical system | AH54.00-P-0010-01A | ||
| Information on preventing damage to electronic components due to electrostatic discharge | AH54.00-P-0001-01A | ||
| Remove/install | |||
| 1 | Remove interior flap above engine | AR88.40-P-1100-03MCC | |
| 2 | Support transmission with floor jack | Use suitable protective base. Otherwise, damage may occur to the transmission. |
|
| 3 | Unscrew screws/bolts (2) | *BA26.00-P-1003-01E | |
| 4 | Remove screws/bolts (3) from transmission carrier (4) | *BA26.00-P-1001-01E | |
| 5 | Remove bearing of transmission mounting (1) | ||
| 6 | Install in the reverse order |
MANUAL TRANSMISSION COMPLETE
| Number | Designation | Engine 780.993 | |
|---|---|---|---|
| BA26.00-P-1001-01E | Bolt, left transmission mount to transmission carrier | Nm | 70 |
MANUAL TRANSMISSION COMPLETE
| Number | Designation | Engine 780.993 | |
|---|---|---|---|
| BA26.00-P-1003-01E | Bolt, left transmission mount to integral carrier | Nm | 56 |