Remove//Install electronic accelerator - AR30.20-P-2000MCC

MODEL 451.3## /4## 1# with CODE (LHD) Left-hand drive vehicle 

Fig 1: Identifying Plastic Nuts, Electrical Connector And Accelerator Pedal Sensor

Courtesy of MERCEDES-BENZ OF NORTH AMERICA.

	Remove/install
1	Adjust driver's seat to the rear
2	Unscrew plastic nuts (1) on accelerator pedal sensor (B37)
3	Lay accelerator pedal sensor (B37) to one side until electrical connector (2) is accessible
4	Separate electrical connector (2) at accelerator pedal sensor (B37)
5	Install in the reverse order
6	Check function of the accelerator pedal sensor (B37) and delete fault memory if necessary
	Connect STAR DIAGNOSIS and read out fault memory	AD00.00-P-2000-04MCC