DTC P0107: Manifold Absolute Pressure / Barometric Pressure Circuit Low Input; DTC P0108: Manifold Absolute Pressure / Barometric Pressure Circuit High Input [06/2015 - ]: Description

Refer to DTC P0106.

Refer to DESCRIPTION

DTC No.	Detection Item	DTC Detection Condition	Trouble Area	MIL	Memory
P0107	Manifold Absolute Pressure / Barometric Pressure Circuit Low Input	The output voltage from the manifold absolute pressure sensor is less than 0.5 V for 0.5 seconds (1 trip detection logic).	Open or short in manifold absolute pressure sensor circuit Manifold absolute pressure sensor ECM	Comes on	DTC stored
P0108	Manifold Absolute Pressure / Barometric Pressure Circuit High Input	The output voltage from the manifold absolute pressure sensor is higher than 4.5 V for 0.5 seconds (1 trip detection logic).	Open or short in manifold absolute pressure sensor circuit Manifold absolute pressure sensor ECM	Comes on	DTC stored

HINT:

When any of these DTCs are output, check the manifold absolute pressure using the Techstream. Enter the following menus: Powertrain / Engine and ECT / Data List / Primary / MAP.

Manifold Absolute Pressure	Malfunction
Approximately 0 kPa(abs) [0 mmHg(abs)]	Short in PIM circuit to ground Short in PIM circuit to EPIM circuit Open in VCPM circuit
130 kPa(abs) [975 mmHg(abs)] or higher	Short in VCPM circuit to PIM circuit Open in PIM circuit Open in EPIM circuit