Installation [06/2015 - ]: Procedure

INSTALL SPARK PLUG
HINT:

Perform "Inspection After Repair" after replacing a spark plug.

Refer to INITIALIZATION [06/2015 - ]
1. Using a 14 mm spark plug wrench, install the 4 spark plugs to the cylinder head sub-assembly.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
  
  NOTE:
  If a spark plug has been struck or dropped, replace it.
  
  HINT:
  
  Install the same parts to their original positions.
INSTALL IGNITION COIL ASSEMBLY
HINT:

Perform "Inspection After Repair" after replacing an ignition coil assembly.

Refer to INITIALIZATION [06/2015 - ]
1. Install the 4 ignition coil assemblies to the cylinder head cover sub-assembly with the 4 bolts.
  Torque: 10 N*m (102 kgf*cm, 7 ft.*lbf)
  
  NOTE:
  If an ignition coil assembly has been struck or dropped, replace it.
  
  HINT:
  
  Install the same parts to their original positions.
2. Connect the 4 ignition coil assembly connectors.
INSTALL NO. 2 CYLINDER HEAD COVER
Refer to PROCEDURE - Step 82